Siena Quilted Quilt Cover Set - White
An all-over quilted quilt cover in cotton sateen, framed by an 80mm plain mitred border with corded piping set into its edge. Closed with concealed buttons on a placket, with two matching quilted pillowcases included.
Description
Siena is a quilted cover rather than a flat one, so it does the work a bedspread would normally do. The mitred border runs down both sides and adds 16cm to the finished width, which is what gives it a proper drop over a deeper mattress instead of stopping short at the mattress edge.
The interlocking block quilting gives the bed texture without pattern or colour, so it sits under the Siena embroidered sheet set without the two competing. With the quilt removed it works on its own as a lighter layer through the warmer months.
What's included
Each quilt cover set includes one quilted quilt cover and a matching pair of quilted pillowcases with concealed button placket closures.
European and bordered pillowcases are sold separately and share the same quilting and piped finish.
Shipping
- Free Shipping Australia-wide
- To NZ/USA/CA/SG/UK & IE $40 (free above $500)
- 21-day return policy on all full-priced, unused items.
Quilt Cover Sets Australia · All Australian bed linen
Fabric & construction
The border
The quilted panel is framed by a plain mitred border, 80mm deep, with a covered corded piping set into its edge over a 1.5mm soft cord. Mitred means the corners are joined at 45 degrees so the border turns cleanly rather than one side overlapping the other, and our specification requires every mitre to be even and accurate to a true 90 degree outer edge. Top stitching runs 1mm in from the turned edge. Because the border runs down both sides of the cover it adds 16cm to the finished width, and that width is what gives it a proper drop over a deeper mattress rather than stopping short at the mattress edge.
The quilting and the closure
The Siena quilting is an interlocking block repeat worked across the whole face, quilted through a cotton sateen face and a cotton sateen backing with a lightweight polyester fibre padding between them. The back of the cover is plain rather than quilted. The closure is concealed buttons on a placket, 16mm and 18mm, colour matched and non-corrosive, each stitched off so the thread cannot unravel, so nothing interrupts the quilted face.
The border is 80mm. There are two of them, which is where the extra 16cm of width comes from, and the width is the whole point.
Specifications
| Material | 100% cotton sateen |
| Quilting | All-over interlocking blocks |
| Border | 80mm mitred border |
| Edge | Corded piping |
| Closure | Concealed buttons |
| Pillowcases | 2 x 50 x 75 cm, quilted front with a plain back |
| Included | 1 x quilt cover and 2 x matching quilted pillowcases |
| Queen | 210 x 210 cm, 226 x 218 cm including the border |
| King | 245 x 210 cm, 261 x 218 cm including the border |
| Super King | 270 x 240 cm, 286 x 248 cm including the border |
| Country of design | Australia |
Care
Machine wash 30 to 40C
Wash with a mild liquid detergent and rinse well. Avoid fabric softeners, which coat cotton fibres and flatten the quilted surface over time.
Tumble dry medium
Dry on medium heat, or line dry out of direct sunlight.
Do not bleach
Bleach and optical brighteners are not suitable for the sateen face or the piping cord.
Complete the set
