Classique Tailored Pillowcases - Grey
The Classique Tailored Pillowcase in Grey is cut from 400TC long-staple cotton sateen with dual grey satin-stitch embroidery. A cool, neutral colourway that sits quietly against the white ground and layers easily with both warm and cool bedroom palettes.
Description
Grey is balanced to sit between warm and cool tones, allowing it to move easily across different interiors without pulling the palette in either direction. It softens the contrast of the embroidery, making the detail visible through tone rather than sharp definition.
Used across the bed, it creates a quieter composition, where the structure is present but understated. It’s a colour that integrates rather than dominates, particularly suited to layered or tonal settings.
Shipping
- Free Shipping Australia-wide
- To NZ/USA/CA/SG/UK & IE $40 (free above $500)
- 21-day return policy on all full-priced, unused items.
Classique Bed Linen · All Australian bed linen
Fabric & construction
The pillowcase
The Classique pillowcases are cut from 400TC single-ply long-staple cotton sateen and sized at 50 × 75cm for a standard Australian pillow insert, 50 × 90cm for King, and 65 × 65cm for European. A top-stitched flange runs close to the embroidered border on all four sides, adding structure to the perimeter without bulk. The envelope closure sits on the reverse, leaving the front uninterrupted. The pillowcase softens progressively with each wash while holding its shape over time.
The embroidery
Two parallel satin-stitch lines in colourfast grey viscose rayon thread run along all four sides of the front face, meeting at each corner in a defined corner motif. The cool neutral tone sits crisply against the white sateen fabric, less contrast than ebony or navy but more definition than tonal white, giving the border a clean, graphic quality.
Grey on white is cool and precise. The border is there, considered rather than quiet.
Specifications
| Material | 100% long-staple cotton sateen |
| Thread count | 400TC — single pick insertion, single ply |
| Weave | Sateen (4/1 construction) |
| Embroidery thread | 100% viscose rayon, colourfast |
| Embroidery | Dual grey satin stitch embroidered lines on all four sides of the front face of the pillowcase with corner motifs at each corner |
| Colour | Grey on white |
| Included | 2 × tailored pillowcases (50 × 75 cm) |
| Closure | Envelope closure |
| Standard / Tailored | 50 × 75 cm |
| King | 50 × 90 cm |
| European | 65 × 65 cm |
| Care | Machine wash 30–40°C, gentle cycle, medium tumble dry |
| Country of design | Australia |
Care
Wash cold or warm
30–40°C on a gentle cycle. Use liquid detergent only as powder detergents and fabric softeners coat the cotton fibres and gradually dull the sateen surface and reduce its natural breathability over time.
Tumble dry medium
Remove while still slightly damp. The sateen surface smooths naturally as the fabric cools, reducing the need for ironing. Avoid over-drying as heat-set creases are harder to remove than those from line drying.
Improves with washing
Long-staple cotton settles into the weave with each wash, becoming progressively smoother and softer over time. The viscose rayon embroidery thread is colourfast and maintains its depth wash after wash.
Common questions
What is included with this pillowcase?
2 × tailored pillowcases (50 × 75 cm) with an envelope closure. Additional sizes including king pillowcases (50 × 90 cm), european pillowcases (65 × 65 cm), sheet sets and quilt cover sets are available within the Classique Bed Linen.
Where does the embroidery sit on the pillowcase?
The satin stitch runs along all four sides of the front face, with a corner motif at each corner. When the bed is fully made, the embroidery frames the pillowcase from every angle and continues the bordered design of the quilt cover.
Why a flange on the tailored pillowcase?
The flange does two things: it adds a structured perimeter that gives the pillowcase a tailored, hotel-style finish on the bed, and it positions the embroidered border slightly inset from the edge so the satin stitch is protected from direct friction at the seam. The top-stitching that secures the flange also reinforces the border area around the embroidery.
Does this pillowcase work with the Classique quilt cover set?
Yes all Classique pillowcases are cut from the same 400TC long-staple cotton sateen and use the same colourfast viscose rayon embroidery thread as the quilt cover set. The embroidery pattern is consistent across all pieces so the satin stitch reads as a continuous design across the full bed when the set is assembled.
What pillow insert fits this pillowcase?
Use a pillow insert that matches the pillowcase size 48 × 73 cm for tailored, 48 × 88 cm for king, 63 × 63 cm for euro. Using an oversized insert will strain the envelope closure and pull the embroidered border out of proportion; using an undersized insert will cause the pillowcase to look loose and shapeless. For full guidance see our Australian bed linen size guide.
How does Grey differ from Pewter?
Grey is a cooler, truer neutral, it reads as a clean mid-grey without the warm green undertone that characterises Pewter. Pewter has more depth and warmth; Grey is crisper and works well in rooms with cool or white-toned palettes. Both read as understated against white sateen but the two colourways have a distinct character difference in person.
Complete the set
Being a small, family-owned business allows us to focus on what matters most: timeless style that brings a touch of luxury to every home, without ever compromising on durability.
