Resort White Quilt Cover Set
A tailored quilt cover set in 400 thread count long-staple cotton sateen, framed by a 35mm mitred border and closed with concealed buttons on a placket. The two pillowcases carry the same 35mm border with an envelope closure. This is the white bedding Flaxfield has supplied to boutique hotels and resorts for nearly twenty years.
Description
This is the white bedding we have supplied to boutique hotels and resorts for close to twenty years, in the form it is used there: a narrow border, a clean face, and nothing on the front of the cover to catch or interrupt.
The border is deliberately restrained. It defines the edge of the bed without drawing attention to itself, which is why it sits comfortably under a bedspread or a throw rather than competing with one.
What's included
Each set includes one bordered quilt cover with a concealed button placket, and two bordered pillowcases at 50 x 75 cm with an envelope closure.
The same 35mm finished mitred border runs on the quilt cover and both pillowcases.
Shipping
- Free Shipping Australia-wide
- To NZ/USA/CA/SG/UK & IE $40 (free above $500)
- 21-day return policy on all full-priced, unused items.
Resort Bedding · All Australian bed linen
Fabric & construction
The border
The border is made before it goes anywhere near the cover. Cut pieces are turned through a 45 degree double fold band folder, the mitres are stitched, then the corners are turned out and pressed. Only then is the finished border laid onto the cover and top stitched through all layers, 1mm in from the folded edge. It is a five stage operation to produce 35mm of finished width, and it is why the border lies flat and holds a true corner rather than rippling along its length.
The closure
Concealed buttons on a placket, 18mm and plain, centred and spaced at 200mm so the opening pulls evenly across its width rather than gathering in the middle. Each button is locked off so the thread cannot unravel. The brand and care label is set inside the placket hem rather than on a side seam, so nothing sits against you while you sleep.
The border is held by folders and guides rather than pins. No pins or staples are permitted anywhere in the factory, so no metal can find its way into a finished piece.
Specifications
| Material | 400 thread count single-ply long-staple cotton sateen |
| Colour | White |
| Border | 35mm finished mitred border, 45 degree double fold, top stitched 1mm from the folded edge |
| Closure | Concealed buttons on a placket, 18mm plain, spaced at 200mm from centre |
| Stitch | 301 lock stitch, 12 to 13 per inch |
| Seams | General seam, 1.2cm seam allowance |
| Pillowcases | 50 x 75 cm, matching 35mm mitred border, envelope closure |
| Included | 1 x quilt cover and 2 x bordered pillowcases |
| Queen | 210 x 210 cm |
| King | 245 x 210 cm |
| Tolerance | Plus or minus 5mm on finished measurements |
| Country of design | Australia |
Care
Machine wash 30 to 40C
Wash with a mild liquid detergent and rinse well. Avoid fabric softeners, which coat cotton fibres and dull the sateen surface over time.
Tumble dry medium
Or line dry out of direct sunlight.
Press on the reverse
Press while slightly damp for a crisp finish.
Do not bleach
Bleach and optical brighteners are not suitable for the sateen.
Complete the set
