Orcia Quilted Quilt Cover Set - White
An all-over quilted quilt cover in cotton sateen, framed by an 80mm plain mitred border with corded piping set into its edge. Closed with concealed buttons on a placket, with two matching quilted pillowcases included.
Description
Orcia is a quilted cover rather than a flat one, so it does the work a bedspread would normally do. The mitred border runs down both sides and adds 16cm to the finished width, which is what gives it a proper drop over a deeper mattress instead of stopping short at the mattress edge.
Used alone through the warmer months it is enough cover on its own. Through winter it sits as the top layer over a quilt without the bed looking overloaded.
What's included
Each quilt cover set includes one quilted quilt cover and a matching pair of quilted pillowcases with concealed button placket closures.
European and bordered pillowcases are sold separately and share the same quilting and piped finish.
Shipping
- Free Shipping Australia-wide
- To NZ/USA/CA/SG/UK & IE $40 (free above $500)
- 21-day return policy on all full-priced, unused items.
Quilt Cover Sets Australia · All Australian bed linen
Fabric & construction
The border
The quilted panel is framed by a plain mitred border, 80mm deep. Mitred means the corners are joined at 45 degrees so the border turns cleanly rather than one side overlapping the other, and our specification requires every mitre to be even and accurate to a true 90 degree outer edge. Top stitching runs 1mm in from the turned edge. Because the border runs down both sides of the cover it adds 16cm to the finished width, and that width is what gives it a proper drop over a deeper mattress.
The piping and closure
A covered corded piping is set into the border seam, made over a 1.5mm soft cord so it holds a defined line without stiffening the edge. The closure is concealed buttons on a placket rather than an exposed row: 16mm and 18mm colour matched, non-corrosive, each stitched off so the thread cannot unravel. Nothing interrupts the quilted face.
The border is 80mm. There are two of them, which is where the extra 16cm of width comes from, and the width is the whole point.
Specifications
| Material | 100% cotton sateen |
| Batting | Lightweight polyester fibre |
| Backing | Cotton, plain and unquilted |
| Quilting | All-over Palazzo pattern |
| Border | 80mm plain mitred border, 45 degree mitres, top stitched 1mm from the turned edge |
| Piping | Covered corded piping over a 1.5mm soft cord |
| Closure | Concealed buttons on a placket, 16mm and 18mm, colour matched and non-corrosive |
| Stitch | Lock stitch, 10 to 11 per inch |
| Seam allowance | 10mm |
| Included | 1 x quilt cover and 2 x matching quilted pillowcases |
| Queen | 210 x 210 cm, 226 x 218 cm including the border |
| King | 245 x 210 cm, 261 x 218 cm including the border |
| Compliance | REACH and SVHC compliant, tested to OEKO-TEX Standard 100 |
| Country of design | Australia |
Care
Machine wash warm at 40C
Wash with a mild liquid detergent and rinse well. Avoid fabric softeners, which coat cotton fibres and dull the sateen surface over time.
Machine or line dry
Line dry out of direct sunlight, or tumble on a low setting.
Do not bleach
Bleach and optical brighteners are not suitable for the sateen face or the piping cord.
Complete the set
